initial push

01-device-info/Device errors.bru

@@ -0,0 +1,11 @@
+meta {
+  name: Device errors
+  type: http
+  seq: 4
+}
+
+post {
+  url: {{base_url}}/errors
+  body: none
+  auth: inherit
+}

01-device-info/Device software versions.bru

@@ -0,0 +1,11 @@
+meta {
+  name: Device software versions
+  type: http
+  seq: 5
+}
+
+post {
+  url: {{base_url}}/sw_ver
+  body: none
+  auth: inherit
+}

01-device-info/LED Temps.bru

@@ -0,0 +1,11 @@
+meta {
+  name: LED Temps
+  type: http
+  seq: 4
+}
+
+post {
+  url: {{base_url}}/ltemps
+  body: none
+  auth: inherit
+}

01-device-info/Remote device info.bru

@@ -0,0 +1,25 @@
+meta {
+  name: Remote device info
+  type: http
+  seq: 6
+}
+
+post {
+  url: {{base_url}}/remote
+  body: none
+  auth: none
+}
+
+docs {
+  # Device Status
+  
+  Get device information without auth.
+  
+  ## Response Fields
+  - `dmxa`: DMX address + 1
+  - `dmxp`: DMX preset (Mode X)
+  - `dn`: Device name
+  - `stat`: Status / 1 if some error else 0
+  - `rdm`: RDM UID
+  - `rdmi`: 1 if device is identifiing over RDM else 0
+}

01-device-info/device-status.bru

@@ -0,0 +1,30 @@
+meta {
+  name: Device Status
+  type: http
+  seq: 2
+}
+
+post {
+  url: {{base_url}}/status_i
+  body: none
+  auth: inherit
+}
+
+docs {
+  # Device Status
+  
+  Get comprehensive device status information.
+  
+  ## Response Fields
+  - `dmxa`: DMX address + 1
+  - `dmxp`: DMX preset (Mode X)
+  - `dmxf`: Preset footprint (X channels)
+  - `dmxi`: DMX input label
+  - `pt`: Device model name + RDM label
+  - `ip`: IP address
+  - `mac`: MAC address
+  - `rdmu`: RDM UID
+  - `rdmn`: RDM device label
+  - `tu`: Temperature unit (F/C)
+  - `lfn`: Device type ID
+}

01-device-info/device-supported-commands.bru

@@ -0,0 +1,33 @@
+meta {
+  name: Device Supported Commands
+  type: http
+  seq: 1
+}
+
+post {
+  url: {{base_url}}/sup_c
+  body: formUrlEncoded
+  auth: inherit
+}
+
+body:form-urlencoded {
+  ~index: 0
+}
+
+docs {
+  # Device Supported Commands
+  
+  Use this command first on each device to get supported parameters, labels and configurations.
+  
+  ## Parameters
+  - `index` (optional): Index of supported command description (0-n)
+  
+  ## Response
+  If index is valid:
+  - `c`: API command name
+  - `p`: Array of supported parameters
+  - `l`: Array of labels for temperatures/timers
+  - `ra`: Resetable value bitmask
+  
+  If index is undefined or >= number of commands: empty JSON
+}

02-configuration/colour-settings.bru

@@ -0,0 +1,40 @@
+meta {
+  name: Colour Settings
+  type: http
+  seq: 8
+}
+
+post {
+  url: {{base_url}}/col_s
+  body: formUrlEncoded
+  auth: inherit
+}
+
+body:form-urlencoded {
+  ~ccri: 0
+  ~cdimc: 0
+  ~hpwrm: 0
+  ~ccalm: 0
+  ~cmixm: 0
+  ~chrwh: 0
+  ~thefs: 0
+}
+
+docs {
+  # Colour Settings
+  
+  Configure colour rendering and mixing.
+  
+  ## Set Parameters
+  - `ccri`: CRI (0-1: high/standard)
+  - `cdimc`: Dimmer curve (0-1: linear/square law)
+  - `hpwrm`: High power mode (0-1)
+  - `ccalm`: Colour calibration mode (0-1)
+  - `cmixm`: Colour mixing mode (0-1: RGB/CMY)
+  - `chrwh`: Chromatic white (0-1)
+  - `thefs`: Tungsten effect simulation (0-5: various wattages)
+  
+  ## Response
+  - All parameters as strings or on/off
+  - `status`: 0 if success
+}

02-configuration/display-settings.bru

@@ -0,0 +1,36 @@
+meta {
+  name: Display Settings
+  type: http
+  seq: 3
+}
+
+post {
+  url: {{base_url}}/dis_s
+  body: formUrlEncoded
+  auth: inherit
+}
+
+body:form-urlencoded {
+  ~dint: 5
+  ~dsd: 5
+  ~dtl: 5
+  ~dor: 0
+  ~daofft: 0
+}
+
+docs {
+  # Display Settings
+  
+  Configure display behavior.
+  
+  ## Set Parameters
+  - `dint`: Display intensity (0-9)
+  - `dsd`: Display screensaver time (0-10)
+  - `dtl`: Display touchscreen lock (0-10)
+  - `dor`: Display orientation (0-2: normal/inverted/auto)
+  - `daofft`: Activate off timer (0-1)
+  
+  ## Response
+  - All parameters with appropriate formats
+  - `status`: 0 if success
+}

02-configuration/dmx-address-mode-rdm.bru

@@ -0,0 +1,35 @@
+meta {
+  name: DMX Address/Mode/RDM Setup
+  type: http
+  seq: 1
+}
+
+post {
+  url: {{base_url}}/set_dmx
+  body: formUrlEncoded
+  auth: inherit
+}
+
+body:form-urlencoded {
+  ~dmxa: 1
+  ~dmxp: 0
+  ~dmxi: 0
+  ~rdmn: RDM name
+}
+
+docs {
+  # DMX Address/Mode/RDM Setup
+  
+  Configure DMX and RDM settings.
+  
+  ## Set Parameters
+  - `dmxa`: DMX address (1-512)
+  - `dmxp`: DMX preset (0-preset count)
+  - `dmxi`: DMX input (0-max, e.g., wired/wireless)
+  - `rdmn`: RDM device label (max 32 chars)
+  
+  ## Response
+  - `dmxf`: Preset footprint
+  - `status`: 0 if success
+  - `pt`: Device model name + RDM label
+}

02-configuration/ethernet-settings.bru

@@ -0,0 +1,39 @@
+meta {
+  name: Ethernet Settings
+  type: http
+  seq: 2
+}
+
+post {
+  url: {{base_url}}/eth_s
+  body: formUrlEncoded
+  auth: inherit
+}
+
+body:form-urlencoded {
+  ~emod: 1
+  ~ee2d: 0
+  ~eanu: 0
+  ~emau: 1
+  ~emas: 1
+  ~esau: 1
+}
+
+docs {
+  # Ethernet Settings
+  
+  Configure ethernet/network mode.
+  
+  ## Set Parameters
+  - `emod`: Ethernet mode (0-4, or 0-2 for Promotion devices)
+    - Labels: disable/ArtNet/gMA1/gMA2/sACN (or DMX/ArtNet/sACN)
+  - `ee2d`: Ethernet to DMX (0-1)
+  - `eanu`: ArtNet universe (0-255)
+  - `emau`: MANet I/II universe (1-256)
+  - `emas`: MANet session ID (1-32)
+  - `esau`: sACN universe (1-32000)
+  
+  ## Response
+  - All set parameters as strings/ints
+  - `status`: 0 if success
+}

02-configuration/graphics-engine.bru

@@ -0,0 +1,38 @@
+meta {
+  name: Graphics Engine Settings
+  type: http
+  seq: 11
+}
+
+post {
+  url: {{base_url}}/graphe_s
+  body: formUrlEncoded
+  auth: inherit
+}
+
+body:form-urlencoded {
+  ~imgar: 0
+  ~edga: 0
+  ~gbms: 0
+  ~slit: 0
+  ~rfrr: 0
+  ~optm: 0
+}
+
+docs {
+  # Graphics Engine Settings
+  
+  Configure graphics and gobo rendering.
+  
+  ## Set Parameters
+  - `imgar`: Image aspect ratio (0-1)
+  - `edga`: Edge antialiasing (0-1)
+  - `gbms`: Gobo selection mode (0-1)
+  - `slit`: Slideshow timer (0-300)
+  - `rfrr`: Refresh rate (0-6)
+  - `optm`: Optics module (0-1)
+  
+  ## Response
+  - Various string and integer fields
+  - `status`: 0 if success
+}

02-configuration/lamp-settings.bru

@@ -0,0 +1,42 @@
+meta {
+  name: Lamp Settings
+  type: http
+  seq: 9
+}
+
+post {
+  url: {{base_url}}/lamp_s
+  body: formUrlEncoded
+  auth: inherit
+}
+
+body:form-urlencoded {
+  ~lonof: 0
+  ~lpwr: 0
+  ~ligde: 0
+  ~llise: 0
+  ~lonpon: 0
+  ~lofvd: 0
+  ~londp: 0
+  ~lofdm: 0
+}
+
+docs {
+  # Lamp Settings
+  
+  Configure lamp behavior and power.
+  
+  ## Set Parameters
+  - `lonof`: Lamp state (0-1: off/on)
+  - `lpwr`: Lamp power (0-4: eco/standard/1700W/1500W/silent)
+  - `ligde`: Lamp ignition delay (0-91: off or 1-90s)
+  - `llise`: Lamp light sensor (0-1)
+  - `lonpon`: Lamp on power on (0-1)
+  - `lofvd`: Lamp off via DMX (0-1)
+  - `londp`: Lamp on when DMX present (0-1)
+  - `lofdm`: Lamp off when DMX missing (0-1)
+  
+  ## Response
+  - All parameters as strings
+  - `status`: 0 if success
+}

02-configuration/led-engine.bru

@@ -0,0 +1,35 @@
+meta {
+  name: LED Engine Settings
+  type: http
+  seq: 10
+}
+
+post {
+  url: {{base_url}}/lede_s
+  body: formUrlEncoded
+  auth: inherit
+}
+
+body:form-urlencoded {
+  ~cprj: 0
+  ~rprj: 0
+  ~colt: 0
+  ~gamc: 0
+}
+
+docs {
+  # LED Engine Settings
+  
+  Configure LED projection and color.
+  
+  ## Set Parameters
+  - `cprj`: Ceiling projection (0-1)
+  - `rprj`: Rear projection (0-1)
+  - `colt`: Color temperature (0-8)
+  - `gamc`: Gamma curve (0-5)
+  
+  ## Response
+  - `cprj`, `rprj`: Integer values
+  - `colt`, `gamc`: String labels
+  - `status`: 0 if success
+}

02-configuration/other-settings.bru

@@ -0,0 +1,46 @@
+meta {
+  name: Other Settings
+  type: http
+  seq: 4
+}
+
+post {
+  url: {{base_url}}/oth_s
+  body: formUrlEncoded
+  auth: inherit
+}
+
+body:form-urlencoded {
+  ~mics: 10
+  ~fanm: 1
+  ~tmpu: 1
+  ~wfiap: 0
+  ~fsmo: 0
+  ~cpm: 0
+  ~btns: 0
+  ~fannl: 50
+  ~them: 0
+  ~frq: 0
+}
+
+docs {
+  # Other Settings
+  
+  Miscellaneous device settings.
+  
+  ## Set Parameters
+  - `mics`: Microphone sensitivity (0-19)
+  - `fanm`: Fan mode (0-1 or 0-3)
+  - `tmpu`: Temperature unit (0-1: F/C)
+  - `wfiap`: WiFi access point (0-1)
+  - `fsmo`: Followspot mode (0-3)
+  - `cpm`: Close proximity mode (0-1)
+  - `btns`: Buttons setting (0-1)
+  - `fannl`: Fan noise level (0-100)
+  - `them`: Theater mode (0-1)
+  - `frq`: Frequency (0-13951)
+  
+  ## Response
+  - All parameters formatted appropriately
+  - `status`: 0 if success
+}

02-configuration/pan-tilt-settings.bru

@@ -0,0 +1,36 @@
+meta {
+  name: Pan/Tilt Settings
+  type: http
+  seq: 7
+}
+
+post {
+  url: {{base_url}}/pt_s
+  body: formUrlEncoded
+  auth: inherit
+}
+
+body:form-urlencoded {
+  ~pr: 0
+  ~tr: 0
+  ~ptf: 0
+  ~ptm: 0
+  ~pte: 0
+}
+
+docs {
+  # Pan/Tilt Settings
+  
+  Configure pan and tilt behavior.
+  
+  ## Set Parameters
+  - `pr`: Pan reverse (0-1)
+  - `tr`: Tilt reverse (0-1)
+  - `ptf`: Pan/tilt feedback (0-1)
+  - `ptm`: Pan/tilt mode (0-1: time/speed)
+  - `pte`: Pan/tilt EMS (0-1)
+  
+  ## Response
+  - All parameters as "off"/"on" or mode strings
+  - `status`: 0 if success
+}

02-configuration/password-settings.bru

@@ -0,0 +1,31 @@
+meta {
+  name: Password Settings
+  type: http
+  seq: 5
+}
+
+post {
+  url: {{base_url}}/set_cfg
+  body: formUrlEncoded
+  auth: inherit
+}
+
+body:form-urlencoded {
+  ~opswd: 2479
+  ~npswd: 1234
+  ~npsch: 1234
+}
+
+docs {
+  # Password Settings
+  
+  Change device webserver password.
+  
+  ## Set Parameters
+  - `opswd`: Old password (four digits)
+  - `npswd`: New password (four digits)
+  - `npsch`: New password check (four digits)
+  
+  ## Response
+  - `status`: 0 if success
+}

02-configuration/wireless-module.bru

@@ -0,0 +1,40 @@
+meta {
+  name: Wireless Module Settings
+  type: http
+  seq: 6
+}
+
+post {
+  url: {{base_url}}/lwm
+  body: formUrlEncoded
+  auth: inherit
+}
+
+body:form-urlencoded {
+  ~unlink: 1
+}
+
+docs {
+  # Wireless Module Settings
+  
+  Get wireless module status or unlink the card.
+  
+  ## Set Parameters
+  - `unlink` (optional): Set to 1 to unlink wireless card
+  
+  ## Response Variants
+  
+  **Linked:**
+  - `lwc`: "linked"
+  - `lws`: Signal strength (0-100%)
+  
+  **Unlinked:**
+  - `lwc`: "unlinked"
+  - `lws`: "..."
+  
+  **Not installed:**
+  - `lwc`: "not installed"
+  - `lws`: "..."
+  
+  - `status`: 0 if success
+}

03-counters/Device Hours.bru

@@ -0,0 +1,29 @@
+meta {
+  name: Device Hours
+  type: http
+  seq: 2
+}
+
+post {
+  url: {{base_url}}/reset_hours
+  body: formUrlEncoded
+  auth: inherit
+}
+
+body:form-urlencoded {
+  ~index: 0
+}
+
+docs {
+  # Device hours
+  
+  Get or reset device hours values.
+  
+  ## Set Parameters
+  - `index` (optional): Index of value to reset (0-3)
+  
+  ## Response
+  - `h0-h3`: Value
+  - `hr0-hr3`: Resetable value
+  - `status`: 0 if success
+}

03-counters/device-temperatures.bru

@@ -0,0 +1,30 @@
+meta {
+  name: Device Temperatures
+  type: http
+  seq: 2
+}
+
+post {
+  url: {{base_url}}/reset_temps
+  body: formUrlEncoded
+  auth: inherit
+}
+
+body:form-urlencoded {
+  ~index: 0
+}
+
+docs {
+  # Device Temperatures
+  
+  Get or reset device temperature values.
+  
+  ## Set Parameters
+  - `index` (optional): Index of value to reset (0-3)
+  
+  ## Response
+  - `t0-t3`: Current temperatures (C/F based on unit)
+  - `tm0-tm3`: Max temperatures
+  - `tmr0-tmr3`: Max resetable temperatures
+  - `status`: 0 if success
+}

03-counters/folder.bru

@@ -0,0 +1,3 @@
+meta {
+  name: 03-counters
+}

bruno.json

@@ -0,0 +1,5 @@
+{
+  "version": "1",
+  "name": "Robe Webserver API",
+  "type": "collection"
+}

collection.bru

@@ -0,0 +1,25 @@
+auth {
+  mode: basic
+}
+
+auth:basic {
+  username: robe
+  password: 2479
+}
+
+vars:pre-request {
+  base_url: 2.0.0.1
+}
+
+docs {
+  # Robe Webserver API
+  
+  ## Setup
+  
+  1. **Authentication**: Most endpoints require HTTP Basic Authentication / Configure these in Bruno
+     - Username: `robe` (fixed, cannot be changed)
+     - Default Password: `2479` (can be changed via webserver)
+  
+  2. **Environment Variables**: Configure these in Bruno:
+     - `base_url`: Your device IP (e.g., `http://2.242.1.2`)
+}